Gas

Description

These regulators are used both in domestic and industrial installations that use natural gas, LPG or other not corrosive gases (dry gases).
COMPACT versions IRC3/IRC5 - IR3/IR5 are preferable for small installations.
This devices are equipped with the following safety devices and accessories:
• inlet fi lter: keep dust and deposits in the pipe
• relief valve: it vents outside small quantity of gas in case there are downstream regulator overpressure. That exhaust it is convoyed outside in case of installation in environment with bad ventilation.
• outlet pressure test point.
On request fi lter regulators with:
• outlet pressure test point.over pressure shut off device: it stops the gas flow when the regulator outlet pressure goes up the device setting value
• outlet pressure test point. low pressure shut off device: it stops the gas flow when the regulator outlet pressure goes down the device setting value. It closes even if there is no inlet pressure.

- EC certifi ed according to EN 88-2
- In conformity with the 2009/142/EC Directive (Gas Directive)
- In conformity with the 97/23/EC Directive (PED Directive)
- In conformity with the 94/9/EC Directive (ATEX Directive)

Description

Gas pressure closing regulator Pmax 0,5 bar ITALPUMP series IR is a gas pressure regulator device adjustable screw which grant a reliable regulation of out put pressure, working principle is based on composition of 3 forces:
1. regulation screw
2. differential pressure working diaphragm
3. downstream pressure

- EC certifi ed according to EN 88-2
- In conformity with the 2009/142/EC Directive (Gas Directive)
- In conformity with the 94/9/EC Directive (ATEX Directive)

Description

Gas pressure closing fi lter regulator
Pmax 0,5 ÷ 1 bar
Pmax 1 ÷ 2 bar
ITALPUMP series IFR is a gas pressure regulator device adjustable screw
and built in fi lter.

- EC certifi ed according to EN 88-2
- In conformity with the 2009/142/EC Directive (Gas Directive)
- In conformity with the 97/23/EC Directive (PED Directive)
- In conformity with the 94/9/EC Directive (ATEX Directive)

Description

Gas fi lter serie IF prevents the passage of a particles of dust or debris brought
by the gas, protecting the regulation and safety device.
Gas fi lter serie IF have a large fi ltering component made of synthetical washable
material which is fully removable for complete inspection and cleaning.
Special O-Ring sealings, resistant to third gas family, make easy removal.
ITALPUMP fi lters permits upstream pressure measurement through an
appropriate standard connection.

- EC certifi ed according to EN 126
- In conformity with the 2009/142/EC Directive (Gas Directive)
- In conformity with the 97/23/EC Directive (PED Directive)

Description

Single stage automatic normally closed solenoid valves that open when
the coil is energized and close when there is no tension.
Pmax = 1 - 3 - 6 bar
It are equipped with a fl ow regulator and adjustable slow opening kit.

- EC certifi ed according to EN 161
- In conformity with the 2009/142/EC Directive (Gas Directive)
- In conformity with the 94/9/EC Directive (ATEX Directive)
- In conformity with the 2004/108/EC Directive
(Electromagnetic Compatibility)
- In conformity with the 2006/95/EC Directive (Low Voltage)

Description

Gas automatic normally closed solenoid valves serie IE open when the coil
is energized and close when there is no tension.
These solenoid valves are controlled by pressure switch, thermostat, etc.

- EC certifi ed according to EN 161
- In conformity with the 2009/142/EC Directive (Gas Directive)
- In conformity with the 94/9/EC Directive (ATEX Directive)
- In conformity with the 2004/108/EC Directive
(Electromagnetic Compatibility)
- In conformity with the 2006/95/EC Directive (Low Voltage)